What Bearing Kit and Idler Hub Fit a 2005 EZ Loader Boat Trailer With UFP H-1377 Idler Hubs?
Question:
I have a 2005 EZloader boat trailer. I would like to purchase the hub bearing kit or the complete hubs for this trailer. The hub has the following info stamped on the back of the hub : UFP, H-1377, A ZHM could be A 2HM. The diameter of the protector on the outside of the hub is 2.0 inch I believe this indicates a tapered spindle with different size bearings. Let me know if you need additional information. Do you have a complete trailer hub or bearing kit for these trailer hubs ?
asked by: Dave
Expert Reply:
The UFP H-1377 is for a #84 spindle. This will use the Bearing Kit # BK2-100 or the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K if you wish to have a all new hub. I recommend using the Grease # L11390 with the bearings or hub. This grease works great in both hot and cold temps and is water insoluble so it will not absorb water.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels