Bearing Kit for 5,200 lb Trailer Axle

Question

Question:

Hello, I have a 2006 Cam Superline Dump Trailer. 5200 lb axles. Im not sure which bearing kit I need.

asked by: Colleen D

0

Expert Reply:

For your 5,200 lb trailer axle the correct bearing kit would be the part # BK3-300 for if the grease seal spindle diameter is 2.25 inch or part # BK3-310 if it is 2.125 inch. It's pretty random which seal diameter is used so you'd have to measure you spindle.

expert reply by: Jameson C

0

Answer 1

Your 5200-lb Lippert axle 121066 uses inner bearing #25580, outer bearing #LM67048 and grease seal #GS-2250DL. For all of these you can use kit #BK3-300. I also recommend bearing packer tool #ALL647646 for a cleaner method of packing the new bearings…

view full answer...

Answer 2

For a bearing kit for a Dexter 5200 axle we have the kit part #BK3-300 which comes with the correct bearings, races, and seal for your axle.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Bearing Kit for 5,200 lb Trailer Axle

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching