Troubleshooting Water Getting Inside Hub on a 2019 Karavan Trailer For Boston Whaler 17 Montauk
Question:
I have a 2019 Karavan trailer for a 2019 Boston Whaler 17 Montauk. Do you have any information on the wheel bearing grease hub? It is not Buddy Bearing brand, but does have an easy lube fitting. I was lubing yesterday and found some water in this housing. The general information that came with the boat/trailer does not give any information about this component. Im preparing for a long trip and dont want any problems trailering. Thanks
asked by: Jim M
Expert Reply:
Your Karavan Trailer most likely uses the Grease Caps # RG04-040 which have a removable Plug # DC-RP to access the grease zerk for adding grease. If you have something different please send me pictures so I can verify what is being used.
A trailer hub will typically have 2 places where water can get inside the hub, the grease cap or the grease seal on the back of the hub. Since you mentioned already having water inside the cap I recommend pulling the hub apart to check the internal components. Depending on how much and how long water was inside the hub you may need to replace the bearings and seals or possibly the hub itself. Once you have the hub apart you will be able to find the part numbers for your bearings and seals to verify what all needs replaced if any parts are damaged.
Products Referenced in This Question
Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Plugs
- TruRyde
more information >
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Grease Seal for Spindle that is 1.68 Inches in Diameter
- Q&A: What is Difference Between Bearing # 168255TB and # 171255TB
- Video: Kodiak E-Z Lube Disc Brakes Installation
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - DC250L-DCRP Review
- Search Results: marine brakes
- Search Results: grease cap tool
- Search Results: idler hub
- Search Results: hub and bearings
- Search Results: bearing buddy
- Search Results: master cylinder
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Q&A: Would Too Much Grease in a Trailer Hub Cause the Grease Caps to Fall Off
- Q&A: Can EZ Lube Spindles Over Fill Trailer Hub And Cause Issues
- Q&A: Could Zerk Fitting be Added to Trailer Spindle to Make it an EZ Lube Spindle
- Q&A: Does The Bearing Buddy Protect the Bearing from Water
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Q&A: Does Lubed Dust Cap and Rubber Plug # DC250L-DCRP Have a Zerk Fitting to Add Grease
- Video: Demco Hydraulic Brake Actuator Reverse Lockout Solenoid Review
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class