Will Camper Hold Down # HSSF Fit a 2011 Ford F-350

Question

Question:

WiIl these work on a 2011 350 Ford short box truck? Will there need to be any alterations that need to be done or will they fit as is?

asked by: Dave M

0

Expert Reply:

I went out to the warehouse and pulled a Camper Hold Down, # HSSF, to measure so you could compare the measurements to your truck to determine fit. The hold down will go around a bed rail that is no wider than 5 inches. The top part of the hold down is 6 inches wide while the bottom, more narrow part is 3 inches wide. The top 2 bolt holes are 3-5/8 inches apart on center. It has an overall height of 11-3/8 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

After speaking to my contact at Brophy, she informed me the Brophy Camper Hold Down #HSSF technically does not have a weight range. This product is limited only by the weight capacity of your 1995 Ford F-250, so you will need to consult your vehicle…

view full answer...

Answer 2

CR Brophy, the manufacturer of the #HSSF tie downs did not test fit on the 2006 Toyota Tundra, so they can neither confirm or deny the fit. I was told that if the bed is single walled and the lip under the bed side is at least 2 inches wide, the tie…

view full answer...

Answer 3

You can use the Brophy Clamp On Camper Tie-Downs #HSSF with your 2002 Ford F-350 crew cab long-bed diesel so long as the truck does not have a drop-in bed liner, plastic rail caps, a double-walled bed or a side-step bed. You also need to have…

view full answer...

Answer 4

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 5

Yes, the Brophy camper tie downs part #HSSF that you referenced can fit truck bed that have plastic bed rail covers like your 2020 Chevy Silverado 2500. I attached a picture that shows them installed on a bed rail that has the covers like you…

view full answer...

Answer 6

The fit of the HSSF bracket will depend on the sidewall construction of your truck bed. Take a look at the provided photo. In the center panel, you can see that the bracket attaches under the lip of the truck bed, and the foot meets the inside of the…

view full answer...

Answer 7

On the Brophy Clamp On Camper Tie Down part #HSWB the horizontal distance from the beginning of the angled portion of the tie down to the end is 6 inches.

view full answer...

Answer 8

Yes the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS54FR will do a great job at eliminating porpoising/bouncing when towing your camper with your new 2021 GMC Sierra 1500. The #RAS54FR does a great job of eliminating…

view full answer...

Answer 9

For your 2021 Chevy Silverado 1500 I recommend going with the RoadActive Suspension Leaf Spring Enhancement Kit #RAS54FR. This kit provides 3,000lbs of load leveling support to keep your truck from sagging while towing your camper, but more…

view full answer...

Answer 10

I reached out to my contact at Brophy and they haven't tested their clamps on any foreign vehicles. They said that their Brophy Clamp On Camper Tie-Downs - Bed Mount - Zinc Plated Steel - Qty 4, #HSBP should work as long as you have less than 5…

view full answer...

Answer 11

The Brophy Camper Tie Downs #HSSF that you referenced do not carry a specific weight or torque capacity since this really is a consideration for the truck that is hosting the slide-in camper. The turnbuckle hardware included in this kit should be…

view full answer...

Answer 12

The The Brophy Camper Tie Downs #TDSF, are a universal fit kit intended to fit as many trucks as possible. While there is nothing to say that it for sure fits, looking at your pictures it seems likely that it will work for your 1968 Ford F-250 Camper…

view full answer...