When Using 60/40 Rule to Place Trailer Axles Should Ball Coupler Be Used or Front of Trailer Frame
Question:
When doing a 60/40 do you go to the hitch or front of the frame
asked by: Dave M
0
Expert Reply:
When it comes to placing axles using the 60/40 ratio you want to use the coupler ball center as the full length and not just to the front of the trailer.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Q&A: Availability of 4 Leaf Springs that are 26 Inches Long
- Q&A: Arch Height of Universal Group Leaf Spring
- Q&A: Recommended Replacement 26 Inch Long Leaf Spring for Trailer Upgrading Axle to 4,000 Pounds
- Q&A: Replacement Leaf Spring Recommendation for 4,400 lb Trailer Axle
- Q&A: 26 Long Replacement Leaf Spring for 4,500 lbs Axle and Lift Kit for 5th Wheel Trailer
- Q&A: Replacement 6-Leaf Spring Recommendation for Trailer with 26-1/4 inch Old Springs
- Q&A: Replacement U-Bolt Kit For Dexter 4400lb 3 Axle With 6-Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Most Popular Wheel Bearings