Replacement Hub/Drum and Brakes For a UFP 10" Hub/Drum Stamped HD 1377 On EZ Loader Boat Trailer
Question:
Hi- I have a an ez-loader boat trailer rated at 3000lb capacity. It has hyd surge brakes, would like to replace both hub assemblies complete. 10 UFP Brand, HD 1377, 08, 0804 is on the hub. Please advise on parts to replace, the complete hub and just brake pads, springs, etc Thanks
asked by: Jeff T
Expert Reply:
Based on previous information we have for your 10" UFP HD 1377 hub it uses the following components. I do recommend pulling one of your hubs to verify that the replacements listed below match your current parts.
Inner Bearing # L68149 (Inner diameter 1.378")
Inner Race # L68111 (Outer diameter 2.361")
Outer Bearing # L44649 (Inner diameter 1.063")
Outer Race # L44610 (Outer diameter 1.980")
Grease Seal # 10-42 (Inner diameter 1.75", Outer diameter 2.33")
If the inner diameters match you will be able to use the Hub/Drum Assembly # AKHD-545-35-G-K
If the numbers or dimensions do not match what you currently have, please let me know what dimensions you have and I will locate the correct parts for you.
For your brakes I can only recommend replacing the entire Assemblies # AKFBBRK-35-D as we do not carry the replacement parts for the original brakes you have from EZ-Loader.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.750 Inch I.D.
- 2.33 Inch O.D.
- Redline
more information >
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G
- Q&A: Replacement Hubs for a 1998 Tracker TrailStar Boat Trailer
- Q&A: Drum Brake Replacement Assemblies for Use with Titan Actuator
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Testing Trailer Brake Magnets for Proper Function