Water Inlet Fitting Size For Dometic 310 Part-Timer RV Toilets

Question

Question:

What size water supply connector tee do I get for a dometic 310 toilet for adding an rv bidet attachment?

asked by: Paula

0

Expert Reply:

The Dometic 310 Part-Timer RV Toilet # DOM57FR water inlet is a 1/2" NPT fitting. You should be able to easily find a tee to connect to the water supply line and water inlet on the toilet, just make sure you determine the bidet's fitting size before you go get a tee and find out it's the wrong size.

expert reply by: Kevin C

0

Answer 1

The Dometic RV toilets like the part #DOM29FR that you referenced use the standard 1/2 inch thread size for the supply line like most toilets do.

view full answer...

Answer 2

We do have a few options to choose from, we have the MaxxAir II and Trailer Roof Vent Cover w/E-Z Clip #MA86JR which is black in color and will fit your standard 14" x 14" roof opening. We also have #MA76JR which is the same cover…

view full answer...

Answer 3

The Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU #FR93FR at its maximum output will produce 60,000 BTU an hour. So at its highest setting if it ran constantly (which it won't, it only runs on demand.) It will consume…

view full answer...

Answer 4

Most brakes also require a (break-in) period. Dexter says to get up to about 20-30 mph and use the manual override several times. They may also feel weak breaking because it is recommended to let the brakes (seat) into the hub for the first 200 miles…

view full answer...

Answer 5

It's certainly possible to replace the electric brakes on your newly purchased R-Pod trailer, but it's hard for me to know if this will resolve your issue, as it's still possible (and more likely) that there is something else going on…

view full answer...

Answer 6

There are several items you might want to try using for removal of corrosion in your 7-way trailer connector, like part #HM48480. White Vinegar A wedge shaped, slip on pencil eraser or art gum eraser Pipe cleaners PB Blaster If the corrosion is…

view full answer...

Answer 7

It sounds like the ground isn't the issue because you bypass that with the cables and still have the clicking of the solenoid #LC118246. It sounds like the solenoid has gone bad and needs replacing. You have confirmed the motor works, so I'd…

view full answer...

Answer 8

If you are not getting the proper amount of braking on your trailer as you should be then there are a few things you can do to determine what the problem is. You will want to start off by making sure that your trailer brakes are adjusted correctly.…

view full answer...

Answer 9

The LaSalle Bristol Toilet Floor Flange w/ Spigot for RV - ABS Plastic - 3" Hub x 4" Diameter #3446336347 will use the LaSalle Bristol ABS Solvent Cement - Black - 1/2 Pint #3447530889. You will simply then just need the length of 3 inch…

view full answer...

Answer 10

If your RV black water pipe is threaded, we have an adapter that may give you the additional length you're looking for. The LaSalle Bristol Toilet Flange, part #3446336347, has a spigot end. The Valterra DWV Adapter, part #D50-2929, converts a…

view full answer...

Answer 11

I have a solution for you, it is a smaller fan unit but we have an item that will function in the way you are looking for. The MaxxFan Mini Plus Manual RV Roof Vent, #MA00-03851 that you linked to needs a fairly stable power supply of 12 VDC and…

view full answer...

Answer 12

We have the Ultra-Fab Solar-Powered Plumbing Vent for Motor Homes - 7" Diameter x 3-3/4" Tall #UF53-945001 which is designed to be mounted on the roof. My recommendation is to use this roof vent and allow your side vents to stay as they…

view full answer...

Water Inlet Fitting Size For Dometic 310 Part-Timer RV Toilets

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching