What Step of Dodge ProMaster Van Adapter Uses Sandpaper and Adhesive

Question

Question:

The instructions and another commenter mention sandpaper, adhesive and primer is required purchased separately for the installation of the awning. The instructions dont provide any description of what to do with these items. Im struggling to find anything online about it either. Do you have any additional information on how to apply these to the installation?

asked by: Brian K

0

Expert Reply:

On step 3 section A you can see where the sandpaper adhesive and primer is used. Basically it's along the edge of the bracket where the exclamation point logo is.

expert reply by: Jameson C

0

Step with Adhesive
(click to enlarge)

Answer 1

The Thule HideAway Awning for ProMaster or Sprinter - Roof Mount - 12' 3" Long x 8' Wide #TH64WJ will require the Thule adapter for installation on your 2018 Winnebago Travato. The correct adater for this awning on a Ram ProMaster is the…

view full answer...

Answer 2

When installing the Thule HideAway Awning #TH490011 using the Dodge ProMaster Van Adapter for Thule HideAway Awning #TH301650, the Sikaflex 252 adhesive is applied to a portion of the brackets and the end caps of the ProMaster adapter #TH301650. I…

view full answer...

Answer 3

While we don't have an install video I attached a link to the install instructions for the Dodge ProMaster Van Adapter part #TH301650 that you referenced. The sika glue is used on the end caps of the adapters.

view full answer...

Answer 4

To mount the 10-5/8' long x 8-1/8' wide Thule HideAway Roll Out Awning for ProMaster or Sprinter #TH620001 to the factory roof mounts on your 2019 Ram ProMaster 1500 you need the Dodge ProMaster Van Adapter #TH301650. I have attached a photo…

view full answer...

Answer 5

Unfortunately, there is not a way to mount the Thule awning on your 2019 Ram Promaster 2500 since you have the topper ladder rack mounted in the factory mounting points. If you were to remove your topper ladder rack then you could use Adapter…

view full answer...

Answer 6

Since your Ram Promaster has the factory mounting points on the roof the correct bracket kit is the part #TH301650 that you referenced for the #TH620002.

view full answer...

Answer 7

The Dodge ProMaster Van Adapter for Thule HideAway Awning TH620002 #TH301650 will attach to preset mounting points in your roof line so there is not drilling. I've attached a picture to assist. This installation does not require any additional…

view full answer...

Answer 8

In order to install the Thule Hideaway adapter, part #TH308960, on your 2019 Ram ProMaster 2500 you need to drill into the roof. It doesn't fit into the factory mounting points. Instead part #TH301650 is what you're looking for. It does fit…

view full answer...

Answer 9

There isn't a way to use the Thule HideAway Awning part #TH64WJ without the legs that it comes with. Without the legs there isn't a way for it to be held up.

view full answer...

Answer 10

Thank you for the photos! The Thule HideAway Awning Adapter #TH308960 you have is designed for "wall mounted" Thule Hideaway awnings, but it looks like you have a "roof mounted" version so you need the mounting bracket #TH301650…

view full answer...

Answer 11

To use a Thule Hideaway Awning #TH620001 on your Winnebago Solis Pocket built off the Ram ProMaster 1500 the correct install/adapter kit is the part #TH301650 that you referenced. This comes with everything needed to use the awning as well as install…

view full answer...

Answer 12

You can leave the Thule HideAway Awning on the roof of your 2020 Ram ProMaster 2500 while you travel. The housing has a durable aluminum construction that protects the fabric from damage when it is rolled up. The Dodge ProMaster Van Adapter for Thule…

view full answer...

What Step of Dodge ProMaster Van Adapter Uses Sandpaper and Adhesive

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching