What is Correct Replacement Hinge for Thule Atlantis 1800 XT Rooftop Cargo Box

Question

Question:

I have a Thule Atlantis 1800 XT roof box and need a part, specifically the hinge for the front of the box. This part number # TH14936 looks correct, but m ycargo box can be opened from either side, will this hinge accommodate that?

asked by: Matt

0

Expert Reply:

The Thule replacement part you referenced, # TH14936, is the correct replacement hinge for all of the Thule Evolution and Atlantis Series Cargo Boxes. It also is a correct fit for their Ascent boxes.

My contact at Thule confirmed this is the correct replacement hinge for your Atlantis 1800 XT cargo box.

expert reply by: Adam R

0

Answer 1

The metal hinges on Thule cargo boxes are riveted in place at the time of manufacture and they are not offered as replacement parts. We do offer internal lid lifter hinges like #TH14936 that fit the various Thule Atlantis boxes. Part #TH14933 also…

view full answer...

Answer 2

The replacement hinge you will want for your Thule Ascent 1100 Cargo Box is the normally the Replacement Dual Force Strut for Thule Roof Box #TH14933 but since it is no longer available you'd have to use the part #TH14936. The spring rate…

view full answer...

Answer 3

Yes the Thule lid lifter part #TH14936 that you referenced will fit your Thule Evolution 2100 cargo box.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

What is Correct Replacement Hinge for Thule Atlantis 1800 XT Rooftop Cargo Box

Product Page this Question was Asked From

Continue Researching