Recommended Extension Brackets for a Truck Bed Camper Jack System

Question

Question:

Looking for camper jack extention brackets to put a midsized truck camper on a full size truck.Non swing out...Can you please show me where to find them on your site? Thx

asked by: Brian

0

Expert Reply:

The only camper jack extension brackets we have are the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems # LC182496 which are swing out.

Theoretically you do not have to utilize the swing out function of the these brackets if you don't have a need to. These will still work fine as an extension.

expert reply by: Bryce D

0

Answer 1

It doesn't look like there are any instructions for the HappiJac Extender Bracket item #HJ54FR on our website and I can't access any on theirs. However, you can use these without the Swing Out Extension Brackets item #LC182496. The bolt holes…

view full answer...

Answer 2

The Swing Out Extension Brackets part #LC182496 which are for HappiJac Truck Camper Jacks will add approximately 3-1/2" - 4-1/2" of clearance to the existing jacks per side. This can then be used to determine compatibility. I would…

view full answer...

Answer 3

As long as it is properly installed the HappiJac Extender Bracket #HJ54FR won't cause you any issues. Will it add some stress? Of course it will since you're extending the jacks out. However, it won't be enough to result in a problem and…

view full answer...

Answer 4

I recommend using the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems item #LC182496 and the HappiJac Fixed Extender Bracket for Dual Wheel Chassis Truck Camper Jacks item #HJ54FR. The fixed extenders are only 5" wide apiece.…

view full answer...

Answer 5

The maximum added clearance per side for the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems #LC182496 is 3-1/2" to 4-1/2". This kit includes 2 brackets that are made in the United States and will work with electric or…

view full answer...

Answer 6

The Swing Out Extension Brackets #LC182496 can be left in the out position and not swung in. Since your 2010 Ram 4500 has a flat bed the part I think you are looking for is the HappiJac Extender Bracket #HJ54FR. This is a fixed extender that does not…

view full answer...

Answer 7

The HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks #HJ54FR (single) or Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems #LC182496 (double) are not compatible with the Atwood electric camper jacks.…

view full answer...

Answer 8

Yes the Swing Out Extension Brackets #LC182496 does fit the HappiJac Swing-Out Extender Bracket #HJ54FR.

view full answer...

Answer 9

The distance between bolts on the HappiJac #LC182496 Jack System, measured center-on-center is 7-1/4" inches and 17" overall length. I have attached a drawing with measurements.

view full answer...

Answer 10

The correct swing-out brackets for a dually are the HappiJac Swing-Out Extender Brackets for Dual Wheel Chassis Truck Camper Jacks #HJ54FR. In terms of size these will give you 3-1/2" to 4-1/2" of extension. You can use these with the…

view full answer...

Answer 11

The only extender bracket that we have for the Happijac is the HappiJac Extender Bracket for Dual Wheel Chassis Truck Camper Jacks #HJ54FR that you mentioned.

view full answer...

Answer 12

From the pivot bolt to the jack bracket on the Swing Out #LC182496 there is a distance of just about 4-1/2"

view full answer...

Recommended Extension Brackets for a Truck Bed Camper Jack System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching