Recommended Replacement Sway Control Brackets for an Equal-i-Zer Weight Distribution System

Question

Question:

Can you please confirm that to replace this I need to order the inner plate, outer plate, l-shaped plate, and one bolt not the entire hardware set? Thanks.

asked by: Catherine

0

Expert Reply:

It sounds like you're just looking to replace your sway control brackets like the Replacement Sway-Control Bracket for Equal-i-zer Weight Distribution # EQ95-01-5540 which would come with all of that plus the hardware you need as well.

This kit works with all Equal-i-Zer systems rated for up to 4K GTW, so If you have something different let me know.

expert reply by: Bryce D

0

Current Sway Control Brackets
(click to enlarge)

Answer 1

The K-Source Towing Mirrors part #KS80900 are a confirmed fit for the factory mirrors of your 2007 GMC Sierra 1500 New Body and would do an excellent job providing you with additional visibility when towing your 8 foot wide trailer. These install…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't come with…

view full answer...

Answer 7

The Electric Jack w/ Footplate and 7-Way Plug #EJ-3527-BBX uses a 7-way RV-style plug. I have included a diagram that shows the pin-out for RV style 7-way plugs. This will show you what each pin does. I have also listed the functions below and linked…

view full answer...

Answer 8

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 9

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...

Answer 10

The only weight distribution systems that do not allow backing up are those that use friction sway control (which is an added piece), so yes, you can absolutely back up with the Reese Pro system you asked about, which is the following part number: -…

view full answer...

Answer 11

The round or trunnion bars refers to the end of the spring bars. Round bars are typically designed for lighter applications, are a bit harder to install and are usually priced lower than trunnion bars. Trunnion bars are typically designed to be used…

view full answer...

Answer 12

It sounds like you're just looking to replace your sway control brackets like the Replacement Sway-Control Bracket for Equal-i-zer Weight Distribution #EQ95-01-5540 which would come with all of that plus the hardware you need as well. This kit…

view full answer...

Recommended Replacement Sway Control Brackets for an Equal-i-Zer Weight Distribution System

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching