Replacement Reservoir For A Lippert Hydraulic Power Unit For IRC Slide Out Systems

Question

Question:

I have a 2003 Forest River Wildcat 27RL with a single slide out and hydraulic tank resivor is cracked and leaking fluid. Do you have a replacement tank?

asked by: Mark J

0

Expert Reply:

If your system is a Lippert (which it almost certainly is) then you can use the Replacement 2-Quart Pump Reservoir Kit for Lippert Components Hydraulic Power Unit # LC46FR. This replacement reservoir is compatible with the Lippert Hydraulic Power Unit for RV Slide-Out IRC System # LC141111.

expert reply by: Kevin C

0

Answer 1

I went ahead and reached out Lippert and they were able to tell me that the mounting screws on the Replacement 2-Quart Pump Reservoir Kit for Lippert Components Hydraulic Power Unit #LC46FR measure 3" from the top screw to the bottom screw, and…

view full answer...

Answer 2

The Lippert XL Hydraulic Slideout and HLG System that is controlled by the Lippert Replacement Hydraulic Power Unit with 2-Quart Pump Reservoir Kit for RV Slide-Out IRC System #LC141111, uses automatic transmission fluid; any ATF can be used. A full…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 7

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 8

Based on the parts diagram from Winnebago your 2013 Itasca Suncruiser 32H will use the Lippert Replacement 500:1 Motor for Electric In-Wall RV Slide-Out System #LC287298.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The piece you're referring to in the #LC26VR kit is called a "shoe". This part is plastic with foam pads on each end that helps cushion the motor bracket as it slides back and forth to either end of the track.

view full answer...

Answer 11

The difference between the 1621 and the 1621SHD is weight capacity and how many bolts is required to mount it. The 1621 uses 4 bolts for mounting. The 1621SHD requires all 6 bolts to be used.

view full answer...

Answer 12

Yes, the Replacement Control Panel for Lippert Components Leveling System part #LC421484 has replaced the Replacement Auto Level Control Panel 234802 you have so this would fit and work great.

view full answer...

Replacement Reservoir For A Lippert Hydraulic Power Unit For IRC Slide Out Systems

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching