Can Kodiak Caliper Fit with Tie Down Engineering Disc Brakes
Question:
I have a venture boat trailer with 2, 3500lb axles 10 and 3/4inch rotors. Currently have Tie Down engineering brake calipers, mounting holes 5 and 3/4inch on center, are Kodiak calipers # KDB225DAC a direct replacement?
asked by: John H
Expert Reply:
Calipers, like the 3.5K Kodiak Disc Brake Caliper # KDBC225DAC, are really only designed to work with same-branded systems so I can't recommend using this for your Tie Down Engineering system.
If you need to only replace the calipers then you'll want to get Tie Down Engineering calipers, otherwise you can switch to a whole Kodiak setup with the Kodiak Disc Brakes # KOD87FR which has all of the parts designed to fit together.
Products Referenced in This Question
Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Caliper Parts
- Caliper
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel - 5 on 4-1/2 - Load Range C
- Shop: Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2
- Shop: Karrier ST185/80R13 Radial Trailer Tire with 13" Aluminum Wheel - 5 on 4-1/2 - Load Range D
- Shop: Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Search Results: brake acuator
- Q&A: Upgrading Leaf Springs on a Trailer with a 3500 Pound Axle
- Shop: Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 2,000 lbs - E-Z Lube
- Shop: Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: k225cp
- Video: Kodiak Trailer Brakes KDBC225DAC Review
- Q&A: Replacement Calipers for TDE 46304 on 2012 Tandem Axle Boat Trailer
- Q&A: Can Kodiak Disc Brake Caliper # KDBC225DAC Be Used on Either Side of Trailer
- Q&A: Bolts and Bracket for the Tie Down Caliper to Kodiak Caliper
- Video: Review of Kodiak Trailer Brakes - 8 Inch Hub and Rotor E-Z Lube Disc Brakes - KOD87FR
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Search Results: boat trailer fenders
- Search Results: surge brake actuator
- Video: Review of Kodiak Trailer Brakes - Replacement Caliper Guide Bolt - KGBS
- Video: Review of etrailer 1-1/4" To 2" Receiver Adapter With 6-1/2" Extension - e43YR
- Video: Kodiak Trailer Brakes KCMB10RD Review
- Video: etrailer Trailer Hitch Receiver Extender Review
- Video: Review of CURT Heavy Duty Receiver Hitch - Weld-On Hitch - C99CR
- Q&A: Are There Replacement Brake Pads for the Tie Down Engineering (TDE) 46304 Disc Brake Calipers
- Article: How Much Does a Boat and Trailer Weigh?
- Search Results: pontoon trailer parts