Can Trailer with Blue Ox 2-Point Weight Distribution Be Backed Up Without Removing Spring Bars  

The Blue Ox 2-Point Weight Distribution System part #BLU82XR would be an excellent option for a 2013 Forest River Rockwood Roo. It's rated for up to 10,000 lbs of gross trailer weight and 800 lbs of tongue weight which should cover just above…

For a weight distribution system that has built in sway control you are going to want the Blue Ox 2-Point Weight Distribution w/ Sway Control item #BLU82XR. This system has a tongue weight range of 600 lbs - 800 lbs which is typically 10% - 15% of…

When it comes to weight distribution, tongue weight is the most important factor. It looks like you are ahead of the game and accounted for that with each of these systems, great job. I would still recommend finding your actual tongue weight once…

Generally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or…

While I can sympathize with your issue, it is not safe to tow a trailer if you only have a 2" hitch ball and your trailer coupler is designed for a 2-5/16" hitch ball, even for a short distance; the insecure connection between hitch ball…

Since your trailer is very close to 5,000 lbs your total tongue weight is very likely to exceed the 600 lb capacity of the 6k weight distribution hitch, so what you need is the 8,000 lb hitch, and I recommend the Fastway e2 (which is made by…

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, the Automatic Changeover RV LP Gas Regulator #37207-30395 will work to replace your Winntec 6020. This regulator uses the same sized fittings as your 6020 and the BTU rating of this is compatible.