How To Determine The Mounting Hardware For the Buyers Products Hook and Keeper # BP64FR

Question

Question:

Looking for the mounting hardware for the door holder Thank you

asked by: Kim V

1

Helpful Expert Reply:

The fasteners needed for the Buyers Products Hook and Keeper # BP64FR are going to vary from trailer to trailer. You will need to determine if you have steel or wood framing as this mean you need either self tapping fasteners or wood screws. The mounting holes are designed for 1/4" fasteners and you will need to determine the correct length based on the thickness of the door and walls. You will be able to acquire the correct fasteners from a local hardware store.

expert reply by: Bud M

1

Answer 1

I attached a picture I got from Buyers Products that has the dimensions of the Buyers Products Hook and Keeper for Enclosed Trailer Door #BP64FR that has the dimensions you are looking for.

view full answer...

Answer 2

We have both single and dual ramp spring sets and form my understanding it has more to do with the weight capacity than anything else. For your 85 lb ramp we have the Single Spring #362SA5 that fits a 5' wide enclosed trailer. Aside from that…

view full answer...

Answer 3

The Ventline Exterior Wall Vent for RV Range Hood, #V2018-01 does not have a screen. The vent is 11-1/2" by 5-1/2" with a 10 bolt pattern. Please note the linked product review video. the holes are set in from the edge by about…

view full answer...

Answer 4

Since trailer makers do not maintain records/specs on smaller items like the door latches used in construction of their trailers you'll be best served by reviewing the linked page that displays all the types of door replacement parts for…

view full answer...

Answer 5

Yes, you can attach the T-Style Hook and Keeper Door Holder #37210525 horizontally. Do understand since the retainer will then be mounted sideways the weight of the hook will not hold it down and prevent coming out of the retailer.

view full answer...

Answer 6

To determine the correct weight springs you will need a scale to determine how much weight is on the door when it lays out on the ground. You will place the scale on the ground in the center of the landing path of the door edge. This will tell you…

view full answer...

Answer 7

Hey Wyatt, so we have a hose that was designed to be used with the #T01-0091VP with the part #W01-4180 which does have a different thread size. This is intentional so that someone doesn't use a standard garden hose that someone might attempt to…

view full answer...

Answer 8

The Go Power Overlander Expansion Kit - 200 Watt Solar Panel item #34282182 has everything you need to connect to your existing Go Power Kit with the exception of extension cables. I have listed the lengths available below: 10' Go Power MC4…

view full answer...

Answer 9

Entry door locks, like the Bauer Products #BA64FR, typically will have a sticker on the inner handle portion that sits inside your RV, but I have installed a few where they also have the key code on a sticker on the inner components of the handle.…

view full answer...

How To Determine The Mounting Hardware For the Buyers Products Hook and Keeper # BP64FR

Product Page this Question was Asked From

Continue Researching