Does the Buyers Products Hook and Keeper for Enclosed Trailer Door Come with Hardware

Question

Question:

Was I supposed to get screws with the door holders?

asked by: Robert G

0

Expert Reply:

The Buyers Products Hook and Keeper for Enclosed Trailer Door part # BP64FR does not come with hardware as the hardware required will vary from trailer to trailer. That said, there isn't anything needed that you can't find at a local hardware store. You'll basically just be using wood screws that can grab onto the trailer walls without going through.

expert reply by: Conner L

0

Answer 1

For your three 6 volt batteries on your travel trailer to mount on the tongue, I recommend the Buyers Products Trailer Tongue Toolbox #3371701680. This box is 36W x 19D x 18 inches tall. It has a double-walled lid to keep the weather out. I've…

view full answer...

Answer 2

I do have a great solution for you, however we don't have a smaller (in terms of width) plastic A-Frame Trailer Toolbox. Since weight is a concern with the steel options, I recommend considering an aluminum box such as the DeeZee #DZ91716, which…

view full answer...

Answer 3

If the lights you want to replace are stop, turn, tail light, and back up lights, then part #30-92-002 and part #30-92-004 would work for you. I have attached a drawing that shows the dimensions of the two lights mentioned above. These lights measure…

view full answer...

Answer 4

For a stone guard we do have the #337STG1210 which is a 10" x 12" aluminum diamond tread plate. This is really the only rock guard we carry here, and we do not have a direct replacement for the factory rock guard. The door keepers are…

view full answer...

Answer 5

It's possible to do, but there is not a bracket or recommended method of installation for a straight tongue trailer to mount an A-frame tool box like the Buyers Products Trailer Tongue Toolbox #3371701680. Realistically, due to its shape…

view full answer...

Answer 6

The Buyers Products Trailer Tongue Toolbox part #3371701680 does not come with mounting hardware. It can be secured in a number of different ways, most drill directly though the bottom of the box and into the frame. If you can find a way to mount the…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Entry door locks, like the Bauer Products #BA64FR, typically will have a sticker on the inner handle portion that sits inside your RV, but I have installed a few where they also have the key code on a sticker on the inner components of the handle.…

view full answer...

Answer 9

Hi Kat, The rubber bumpers that we offer are all 96" in length but can come in different widths. Based on the dimensions you provided i your pictures the #D3-96 is going to be the best fit, but you will have to cut it down to size.

view full answer...

Does the Buyers Products Hook and Keeper for Enclosed Trailer Door Come with Hardware

Product Page this Question was Asked From

Continue Researching