Availability of Water Heater Drain Plug/Valves

Question

Question:

Search on your web site is nearly useless. Search for water heater drain plug and youll get pages of totally unrelated parts. Not even close.

asked by: Thomas J

0

Expert Reply:

Our search feature can be frustrating but I do have some drain plug/valve options for you depending on what size you need.

We have the Valterra Water Heater Drain Valve - 1/2" # A10-4003VP, the Valterra Water Heater Drain Valve - 1/4" # A10-4001VP and the Valterra Water Heater Drain Valve - 3/8" # A10-4002VP.

And If you need help with a stubborn plug in the future I suggest the Camco RV Water Heater Drain Valve Wrench # CAM11653

expert reply by: Jameson C

0

Answer 1

Yes, the Camco Water Heater Element #CAM02103 you referenced will work perfectly as a replacement on your Atwood model GC6AA-9E model water heater. I have attached a sample install video that you might find helpful as well.

view full answer...

Answer 2

The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25" - Smoke #FVU1500GR is the same translucent color of the Fan-Tastic Vent #FVK1020-19. This isn't so much a blue color as a gray color similar to sun…

view full answer...

Answer 3

I am not extremely familiar with the Surburban Water Heaters but after some research it appears they have a two-in-one drain valve/anode rod. Although we do not have a direct replacement for this it looks like others that were having trouble finding…

view full answer...

Answer 4

The valve may be broken if turning the wings does not open it. Most likely it's time for a new one. I'd need to know what size you need but we have the 1/2 inch like part #A10-4003VP, 1/4 like part #A10-4001VP and 3/8 like part #CAM11683.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 9

First we do have the basic Curved Equalizer #TREQ104 which matches your 5-3/4" length and 2" height. As these are sold individually you will need 2 for your 1998 Fleetwood Terry camper. You might consider upgrading to a cushioned equalizer…

view full answer...

Availability of Water Heater Drain Plug/Valves

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching