Over Cab Ladder Rack Solution for 2020 Jeep Gladiator

Question

Question:

Is there an over the cab option ladder rack for the jeep gladiator? Or can the over the cab option be added to a rack like the Trac Rac? Thank you

asked by: Austin H

0

Expert Reply:

For an over the cab style ladder rack that fits your 2020 Jeep Gladiator you'd want the Thule TracRac part # TH27000XT and then add the Cantilever Extension part # TH24001XT and you'd be set.

There aren't any other options that would accomplish this.

expert reply by: Jameson C

0

Answer 1

Hey Steve, unfortunately the only tonneau cover we have that works with the Thule TracRac TracONE Truck Bed Ladder Rack - Fixed Mount #TH27000XT is the BAK Revolver X2 Hard Tonneau Cover #BAK97FR. This is partly what you're looking for, being…

view full answer...

Answer 2

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 3

The Adarac Pro Series truck bed ladder rack part #A38ZR is a confirmed fit for your 2020 Jeep Gladiator, is black, has a 500 lb weight capacity, and is compatible with tonneau covers like the BAK X4 part #BAK88ZR that fits your 2020 Jeep Gladiator.…

view full answer...

Answer 4

I have a ladder rack that will work for your 2020 Jeep Gladiator with bed cover, but the Yakima ladder rack that you were looking at actually clamps onto the bed rails which would interfere with tonneau covers. I recommend looking at the Adarac Pro…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 10

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Thanks for reaching out, Roy! The tie-down rails you see in the discussion video for your 2023 Ford F-150 Lomax Stance Hard Tonneau Cover #LOM76DR isn't something that we carry and it doesn't look like Lomax has them either, but we do have…

view full answer...

Over Cab Ladder Rack Solution for 2020 Jeep Gladiator

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching