Can a Soft Shackle Be Used With the Bulldog Winch Snatch Block # BDW48SV?

Question

Question:

I was wondering if this snatch block would work well with a soft shackle? I understand the pulley is intended for synthetic.

asked by: John H

1

Helpful Expert Reply:

Yes, you can use a Soft Shackle # BDW20311 for connecting to an attachment point for the Bulldog Winch Snatch Block # BDW48SV. The only consideration is this particular shackle is rated for less than the snatch block if you are pulling towards the higher end of the weight capacity.

expert reply by: Bud M

1

Answer 1

Wiring kit #BDW20347 is the kit used to wire the winch at the front of the vehicle. I will add a link to that product page below, where you can see exactly what's included as well as current pricing. The accessory kit, #SW2224, includes a Pulley…

view full answer...

Answer 2

Most people would have the trailer level (not tilted) when winching the vehicle up to the back of the trailer and then from there tilt the trailer and winch it up onto the trailer. A snatch block wouldn't be super helpful since you'd…

view full answer...

Answer 3

While locking hitch pins aren't rated for capacity like a hitch, the strongest is the InfiniteRule hitch pin, which has a 42,000 lb shear strength. They are available for 2", 2-1/2" and 3" hitches: - 2" Hitch: InfiniteRule…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Can a Soft Shackle Be Used With the Bulldog Winch Snatch Block # BDW48SV?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching