Will Replacing the Thermostat On the Furrion Chill A/C Fix A Temperature Misreading Sensor Issue?  

Hey Brad, like with all RV AC units the actual temperature probe is built into the controller of the AC unit and not the wall mounted thermostat. So the part #FR33PR will not relocate the sensor like you are wanting.

To remove the cover for the Furrion Premium Wall Thermostat for Furrion Chill HE RV Air Conditioner #FR33PR you need to rotate the thermostat cover counter-clockwise and pull out the base plate. Also, I'm sure you'll find this out but…

An E3 error code on a Furrion AC system means you have a communication error between the controller and thermostat. This is typically caused by the A and B wires being flipped from the factory. With your trailer being so new this could be the cause…

Yes, you can use a multi-zone controller like the Replacement Premium Wall Thermostat for Furrion Chill HE RV Air Conditioner #FR93PR to control one AC, but you wouldn't really need it and would be better off using the single zone…

There could be many reasons why your Furrion AC is only running for a bit and then shutting off. What I think is going on is there is cold air blowing onto the thermostat and it thinks that the temperature it was set to was reached and shuts off.…

I reached out to Furrion who said that for the Single Zone Controller #FACC12SA-BL, dip switch number 2 should be the only one on.

It sounds like there is an internal issue with either the Thermostat #FACW12PA-BL or the Control Box #FACC12SA-BL on your Furrion AC in your 2022 Grand Design Transcend. The E3 error code indicates and error in communication from the control box to…

Dip 4 will need to be placed in the "on" position in order for the signal to pass from the controller in your Furrion Chill HE Replacement RV Air Conditioner #FR58PR to the furnace. On the single zone controllers the first two dip switches…

Yes, the Furrion Chill HE RV Air Conditioner System #FR23PV comes with the Premium Wall Thermostat #FR33PR which has a temperature sensor wire (pictured below) to sense the temperature instead of the previous versions that had the sensor built into…

The power for the thermostat and the temperature sensor will come from the Replacement Single Zone Controller for Furrion Chill RV Air Conditioner Setup #FACC12SA-BL The Replacement Premium Wall Thermostat for Furrion Chill RV Air Conditioner -…

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

I spoke with Furrion and they stated that the newer thermostats would be compatible with older model systems and that once you swap over to the new thermostat the system should automatically swap over to the thermostat temperature probe without you…