Recommended Hitch for a 2014 Jeep Cherokee
Question:
Im looking for a class II trailer hitch for a 2014 Jeep Cherokee front wheel drive.
asked by: Gary S
Expert Reply:
I have a solution for you but there are no class II hitches available for your 2014 Jeep Cherokee. I checked with our vendors and no one made one. Instead, you will want the etrailer Hitch item # e62TR and the Hitch Reducer 2" to 1-1/4" item # HT02. This combination will allow you to use class I and II accessories with your class III hitch without sacrificing capacity.
The etrailer Hitch item # e62TR is custom fit and bolts to your Jeep with included hardware. I really like this hitch because the crosstube mounts behind the bumper cover completely concealing it. This leaves only the 2" receiver visible which is a better look and helps with ground clearance.
The class III hitch is always a better option than a class I or class II. They have quite a bit of additional capacity and a wider selection of accessories. If you already have a class II bike rack feel free to email me back with the manufacturer and I can see if they make their own reducer sleeve.
I have linked an installation video below so you can see how to get this hitch set up.
If you are planning on towing you will also need a wiring harness item # C56208 and a ball mount kit item # C45534.
Products Referenced in This Question
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2 Inch Hitch
- 2 Inch to 1-1/4 Inch
- Brophy
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Can I Use Both the 7-Way and 4-Way Connectors at the Same Time on a 2015 Chevrolet Silverado
- Q&A: Reese Extension/Reducer # RP45292 Compatibility with Class V Factory Hitch on 2013 Ram 2500
- Q&A: Hitch Extension for Towing a Boat on a Truck with an In-Bed Truck Camper
- Q&A: Taillight Replacement for Trailer with SAE Number 1ST P2-84-DOT
- Q&A: Closest Metric Replacement Tire Size for 7.00-15 Tire on Livestock Trailer
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing
- Article: Replacement Automotive Lighting
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class