Recommended Tie Down Eye Bolts for Rola Haul-Your-Might Truck Bed Ladder Rack

Question

Question:

are these tie down anchor bolts compatible with the Rola ladder rack for a 2018 Tacoma?

asked by: Tim

1

Helpful Expert Reply:

I do have an option for you but there is actually a tie-down bolt kit designed specifically for the Rola Haul-Your-Might Truck Bed Ladder Rack, part 59796 but it has been discontinued. That said, the Eyebolts for Rhino-Rack Aero/Sportz Crossbars part # S604 should work in its place no problem. The CargoSmart Eye Bolt Tie-Down Anchors part # 348819 would not be a fit.

expert reply by: Conner L

1

Answer 1

We've actually had this question a few times and the Rhino Rack Eyebolts part #S604 do fit into the top channel of Thule crossbars like what you have.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 6

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 will fit the Roll N Lock tonneau cover with XT rails.

view full answer...

Answer 7

My Retrax representative has confirmed that the Rhino Rack #RRVA180B-RRRLT600 roof rack quick disconnect feet and the 71 inch crossbar are indeed compatible with the accessory slots in the rails of your Retrax Pro XR tonneau cover. I've snipped a…

view full answer...

Answer 8

Yes, the Rhino-Rack Vortex Crossbars #RRVA180B-RRRLT600 will fit the Pace Edwards UltraGroove #311-KRC3250 on your 2022 Ram 2500. This will also require the Adapter Kit for Rhino-Rack RTL600 Legs #RRT-FK1. Once installed, you will be able to add a…

view full answer...

Answer 9

For a set of 54 inch Rhino Rack aero crossbars that fit the ARE camper shell tracks of your 2020 Ford F-150 with the part #Y02-480B-NT.

view full answer...

Answer 10

The tracks mount to the roof of your 2017 Ford F-350 camper shell by drilling the tracks into the roof of the vehicle. I've included a video of our install team mounting the RhinoRack System, part #Y02-500B onto a 2011 Ford F-350 so you can get…

view full answer...

Recommended Tie Down Eye Bolts for Rola Haul-Your-Might Truck Bed Ladder Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching