Galvanized Hub With L44643 Bearings For 8 Inch Wheel
Question:
Hi, can I use these hubs for a 8” boat trailer tire? Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized Item # AKIHUB-545-2-G-1K
asked by: Peter T
Expert Reply:
While there is a similar option for you, the Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-2-G-1K is only for 10" to 12" wheels. For an option that will work with 8" wheels, uses the same L44643 bearings, and is galvanized, what you need is the following:
- CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13215
The # CE13215 says it is for 2,500 lb axles, but fits the exact same spindle as the # AKIHUB-545-2-G-1K, just with a slightly higher weight capacity.
Products Referenced in This Question
CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- CE Smith
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Review of Taskmaster Trailer Tires and Wheels - Tire with Wheel - TA22MR
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Search Results: axle nut
- Search Results: axle spindle nut
- Search Results: am31202
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Q&A: Trailer Wheel and Tire Recommendation for Size 4.80-12 with Higher Speed Rating
- Q&A: Comparing Kenda Karrier, Taskmaster and Provider Special Trailer Tires in Size ST21575R14
- Q&A: Recommended Grease for Repacking Bearings on CE Smith Trailer Hub Assembly # CE13100
- Q&A: Can Kenda ST145R12 Radial Trailer Tire & Wheel Replace 5.30R12 Trailer Tires
- Q&A: Recommended Replacement Tires for 20.5x8.0-10 Size Boat Trailer Tires
- Q&A: Kenda vs Taskmaster Wheel and Tire Comparison for 4.80-12 on 4 Bolt Wheel
- Q&A: How to Determine the Correct Replacement Hubs for a Boat Trailer
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Article: Measuring a Trailer Tire
- Search Results: 12 inch aluminum wheels
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: Kenda Tires and Wheels - Tire with Wheel - AM31202 Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM35354 Review
- Video: Review of Americana Trailer Tires and Wheels - Wheel Only - AM48VR
- Video: CE Smith Bearing Protectors with Covers Review
- Video: Curt Tri-Ball Trailer Coupler Lock and Hitch Pin Lock Review
- Search Results: bearing buddy cap
- Search Results: l44643
- Search Results: grease