Recommended Slide Topper For A 2023 Grand Design Reflection 26RD

Question

Question:

We are looking for a Sloera Slider Topper Awning for our 2023 Grand Design 26RD. in black . the slider is 11 3 1/2 X 3 1 . Thank you.

asked by: Karl R

0

Expert Reply:

For a 135.5" flange edge to flange edge measurement you would need the Solera RV Slide-Out Awning - 139" Wide - Black # LCV000168328 (white # LCV000139496). This is going to have a little bit of overhang so you'll want to make sure that you have roughly 5-7" of clearance on each side of the slide out to avoid any interference when retracting the box.

You'll also want to pick up some butyl tape # AL28FJ for the mounting brackets that you'll screw to the slide out to prevent water from leaking in. I've attached a short video below where I'll walk you through the installation process.

expert reply by: Kevin C

0

Answer 1

You would want to measure the distance of the opening of the vent. The Vent Cover #BV0554-03 that you referenced fits 14-1/4 by 14-1/4 inch openings. Nearly all roof vents are 14-1/4 inch by 14-1/4 inch. You probably have one of the styles that we…

view full answer...

Answer 2

The fully assembled weight of the MORryde RV Cargo Sliding Tray - 90" x 39" - 2 Way Slide - 60 Percent Extension - 800 lbs #MR93FR is 159 lbs.

view full answer...

Answer 3

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Answer 4

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

view full answer...

Answer 7

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 8

The correct height setting is going to vary by trailer but you can get there taking some measurements. First make sure your trailer is on level ground and then measure from the ground up to the bottom of the king pin. Then on your truck take a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Recommended Slide Topper For A 2023 Grand Design Reflection 26RD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching