Replacement 12V DC Battery Charger for a Firman WO3383 Generator

Question

Question:

Hello, I am looking for the Receptacle battery Charger For the Firman WO3383IR Generator. the part number is 330713618 ..Do you carry this? I know you have the Charger which i need as well ..part #330713634 Thank You

asked by: Chris

1

Helpful Expert Reply:

I went ahead and checked out your Firman WO3383IR and it turns out unfortunately the receptacle you're referencing is not replaceable.

That said, the only replacement we carry that you're needing as well is the Replacement 12V DC Battery Charger for etrailer Portable Inverter Generator # 333-330713634.

expert reply by: Bryce D

1

Answer 1

Yes, the Replacement 12V DC Battery Charger #333-330713634 would work with Firman portable generators like the Firman 3,300-Watt Portable RV Dual Fuel Inverter Generator #FIR54FR.

view full answer...

Answer 2

The etrailer.com and Firman brand generators are essentially the exact same thing just branded differently. The advantage to the etrailer brand is the price is going to be a bit lower. The advantage to the Firman brand is a life time warranty on…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 11

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Replacement 12V DC Battery Charger for a Firman WO3383 Generator

Continue Researching