Availability of Over Under Kit for 2,200 lb Dexter Trailer Axle
Question:
Hello, I have a 4x8 trailer i would like to raise and with a 2200 lb axle. 5 lug on 4.5 spacing. Can I get a dexter axle flip kit for that one. Only seen the 2 3/8 kit. Thank you,
asked by: Jake H
0
Expert Reply:
All you would need for an over-under kit for a 1-3/4 inch round 2,200 lb axle would be the U-bolt kit part # APUBR-10 and the spring seat part # TRSS175. You would need two of the spring seats.
expert reply by:
Jameson C
0
Products Referenced in This Question
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 1-3/4 Inch
- TruRyde
more information >
Product Page this Question was Asked From
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4-1/4 Inch Long
- Dexter
more information >
Continue Researching
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Axle And Leaf Springs For A 4' x 6' Single Axle Trailer
- Article: Trailer Tire Sizing
- Q&A: Is There An Axle Flip Kit for a 2,000 Lb 1-3/4 Inch Diameter Axle
- Q&A: Could Shackle Bolt # 166081 be Used with CE Smith Suspension Hanger # CE14016G
- Article: Where to Position the Trailer Axle?
- Q&A: How To Measure For Hub-Face And Spring Center Measurements On An Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Torque Spec for U-Bolts on 2K Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long
- Article: How to Raise Your Travel Trailer Height
- Q&A: Can an Axle Over Under Kit be Made for 1-3/4 inch Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires