Correct TorkLift Uprising Steps To Replace Fold Down Steps on Grand Design Reflection 337RLS

Question

Question:

Looking for Torklift steps upgrade for my 2022 Grand Design Reflection 337RLS. Factory steps fold up inside doorway so no step well under the 5th wheel. Can I install inside door or is there a step well that mounts underneath?

asked by: Steve B

0

Expert Reply:

The TorkLift GlowStep Revolution Uprising Steps part # TLA9005 will work great to replace the fold down steps (Lippert SolidStep RV Steps/MORryde StepAbove RV Steps) on your 2022 Grand Design Reflection 337RLS. I checked with TorkLift to confirm this for you.

expert reply by: Conner L

0

Answer 1

Based on your needs the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step #TLA9005 is going to be the best solution for you. This fold down step has 5 steps for a 7-1/2" rise/drop, which is the smallest that we currently offer. It…

view full answer...

Answer 2

In order for the bracket of the TorkLift GlowStep Revolution Uprising Steps #TLA9005 that you referenced to fit the door sill the height does need to be between 5/8 inch and 3/4 inch to allow the door to still close over it. So if you can use a…

view full answer...

Answer 3

It sounds like you're asking if the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step #TLA9005 will work where your previous Morryde steps were. If this is what you're asking, you'll just have to take a couple of measurements to…

view full answer...

Answer 4

I reached out to TorkLift for you, and they said that small of a difference will not be a factor and that yes, you can install the GlowStep for the 28 inch doorway, which is the following part number: - TorkLift GlowStep Revolution Uprising Steps w/…

view full answer...

Answer 5

Yes the TorkLift GlowStep Revolution Uprising Steps, #TLA9004 has a booster/bonus step intended for use when needed. This is a three steep model intended for an entry height of 27-3/8" to 34-7/8" with 28" doorways. If you will need the…

view full answer...

Answer 6

The SolidStep Manual Fold-Down Steps part #LC791572 will fit a door way from 25" -28.9" wide when measuring the frame inside. If the factory label sticker shows a doorway width between 26"-29" then the above steps will work for…

view full answer...

Answer 7

Welcome back! You do not need to cut anything away! So long as your 5" of clearance was measured with your trailer loaded and resting on the suspension you will be good. The SumoSprings Trailer Helper Springs item #SS26MV include spacers that…

view full answer...

Correct TorkLift Uprising Steps To Replace Fold Down Steps on Grand Design Reflection 337RLS

Product Page this Question was Asked From

Continue Researching