Replacement Friction Hinge For A Coleman RV

Question

Question:

Hello, I have a dexter door and would like to put a friction hinge on the door does loppers make a friction hinge that will convert my Dexter door hinge?? I have added the door information as an attachment. Thanks for your help! Regards,

asked by: Matthew F

0

Expert Reply:

There isn't a database for us to check the door based, only the manufacturer would be able to look up any info on it. The friction hinges # LC95VR and # LC22NJ that we carry are a universal fit so they will fit most RV doors but typically will not line up with the original mounting holes. You would need to fill in the old holes with caulk or gasket maker and then drill new holes to match the mounting holes in each leaf. Manufacturer's typically use rivets but you could use screws if you wanted to instead.

expert reply by: Kevin C

0

Answer 1

The Replacement Entry Door Hinge for RV - 6 Leaf - White #LC198295 could very well be what you're needing for your 2001 Fleetwood Expedition 36T Diesel but even if you sent me pictures of your current hinges you would be the better judge of that…

view full answer...

Answer 2

The overall length of the Replacement Entry Door Hinge for RV #LC198295 is 9 1/4" long. The overall width of the shorter leafs are 2 1/8" long and the longest is about 2 1/2" long. Included is a video with additional information as…

view full answer...

Answer 3

The Lippert #LC95VR Controlled Motion Door Hinge will fit most doors. To check for size, compare your door thickness with the provided dimensions on the attached drawing. The leafs with 3 holes go on the outer wall frame. Leafs number 2 and number 4…

view full answer...

Answer 4

If the door hinge on your 2005 Winnebago Vectra has a similar design then yes, the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf #LC95VR will work as a replacement. This is a universal product that has an overall length of…

view full answer...

Answer 5

Although we do not have the instructions for the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR that you mention I was able to get in contact with Lippert, and they were able to send over the instructions. The instructions are as…

view full answer...

Answer 6

While we don't carry a hinge with the exact leaf setup as what you have pictured, the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black #LC95VR is still a viable replacement option. Since the leaf configuration is slightly…

view full answer...

Answer 7

Nope, the Replacement Entry Door Hinge for RV - 6 Leaf - White #LC198295 is NOT a controlled motion friction hinge. Just in the interest of being thorough, a friction hinge is available with part #LC22NJ, but it sounds like you are trying to avoid…

view full answer...

Answer 8

Hey Cliff, with the Replacement Controlled Motion Hinge #LC95VR to get the desired effect where the door doesn't swing open or closed all you have to do is replace is a single hinge and not all three.

view full answer...

Answer 9

You'll most likely have to drill new holes for each of the mounting leafs for both the screen door and entry door when installing the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR so it really isn't a big deal. You can fill in…

view full answer...

Answer 10

No the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black #LC95VR does not come with mounting hardware. You will need to reuse the existing hardware.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Friction Hinge For A Coleman RV

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching