Steps To Determine Correct Replacement Bearing Kit for 2005 Karavan BW-2350-74-ST Boat Trailer
Question:
Hello, I’m looking for a bearing kit for my 2005 Karavan boat trailer. Model of trailer is BW-2350-74-ST. The axel has a label 310-01524-ZN-B Thank you
asked by: Tyson S
Expert Reply:
I looked up some specs on your 2005 Karavan BW-2350-74-ST and based on its GVWR it more than likely uses a 3,500lb axle, though I HIGHLY recommend verifying this first since trailer manufacturers like to just use random axles they have laying around.
Assuming it is in fact a 3,500lb axle you'll need bearing kit # BK2-100, but you can confirm this by checking the axle tag on the center of the axle beam to see what the axle rating is, or if the tag is missing which is likely due to the trailers age you'll want to use calipers # PTW80157 to measure your spindle using the below diagram.
As long as your outer bearing surface of the spindle measures 1.063", and the inner bearing surface measures # 1.378" the above kit will work perfectly. If you find you have a different size spindle just send me those measurements and I'll get you the right bearings.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Karavan 2600 lb Single Axle Boat Trailer Electric Brakes
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Q&A: Hub/Bearing Kit for Karavan Trailer with 2,200 lb Axle
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: 4" Carbon Fiber Digital Caliper
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Q&A: Karavan Boat Trailer Replacement Hub with Bearings L68149/L44649
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Brake Controller
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Wiring
- Video: Demco Hydraulic Brake Actuator Review
- Video: Kodiak Trailer Brakes 18SI-BLKIT Review
- Search Results: surge actuator
- Search Results: kodiak disc brake kit
- Search Results: brake line kit
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Would Demco Brake Actuator Be Proper Replacement for Tie Down Engineering Model 660
- Q&A: What is the Difference Between a Trailer Axle and Spindle
- Video: Dexter Trailer Hub and Drum Assembly Installation 8-247-50
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: brake controller
- Video: Hopkins Trailer Breakaway Kit - Kit with Charger - 20400 Review
- Video: Hopkins Engager Push-To-Test Trailer Breakaway Kit Review
- Video: Choosing the Right Brake Controller
- Search Results: 3040p
- Search Results: brkh10b