Replacement Frame For Kwikee Step 372558

Question

Question:

I have LCI 372558 step. I would like to get frame only. Is this possible and how much would it be?

asked by: Bill

1

Helpful Expert Reply:

Yes, we have the frame only for the Kwikee Step # LC372558; the correct part is as follows:

- Replacement Step Frame # KW54FR

All prices can be found either on the product page or just by scrolling down.

expert reply by: Kyle S

1

Answer 1

The Replacement Step, Motor, and Control for Kwikee RV Electric Steps #LC372558 would be the easiest and best solution to replace the Kwikee Series 38 steps you have on your 2001 Monaco Diplomat. These will bolt right in place of what you have for an…

view full answer...

Answer 2

The part that you're looking for (Lippert part 369527) is the Replacement Step Frame for Kwikee 25 Series Electric RV Steps - 22" x 8" Bolt Pattern #KW54FR, which is the frame without the motor your Kwikee Steps #LC372558.

view full answer...

Answer 3

If you have Lippert electrical steps, like the Kwikee Platinum Series Double Electric Step #LC372558, then you are most likely hearing the result of some part being bent. What I recommend doing is getting to were you can see under the steps while…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 12

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Replacement Frame For Kwikee Step 372558

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching