Replacement Legs For HappiJac Truck Camper Jack Systems

Question

Question:

I have a Bigfoot 10.5 2500. 1998. One of the Happijacs is noisy and needs replacing. All the wiring, control board, and hand switch work great. Can I add legs only and will my electric motors fit them??

asked by: Gary D

0

Expert Reply:

Yes, you can replace the leg with either the Replacement Jack for HappiJac Truck Camper Jack Systems - 34-1/2" Lift # LC736514 or 36-1/2" Lift # LC736515 depending on your system and just reuse the motor you currently have.

If you find the motor is also the issue when replacing the leg you can use part # LC759927 to replace just the motor head.

expert reply by: Kevin C

0

Answer 1

Sounds like you need the Replacement Clutchless Motor Head for HappiJac Truck Camper Jacks - Qty 1 #LC759927. It is the exact replacement for the happiJac system motor head.

view full answer...

Answer 2

I reached out to my contact at Lippert, and she confirmed that you will be able to use the Clutchless motor head #LC759927 on your 4800 Happijack jack as a replacement for your current clutched motor head LC182515. However, you will need to have the…

view full answer...

Answer 3

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 4

The HappiJac Electric Truck Camper Jack System #LC736514-ELKIT is the replacement kit for the 4100 series jacks that you have. It uses the same Replacement Jack #LC736514 and Motor Head #LC759927 for the front and rear jack positions.

view full answer...

Answer 5

Looking at pictures I found of the 2002 Lance 1121 it looks like it has HappiJac jacks on it. For the brackets you can use the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems #LC182496. The replacement legs will require more…

view full answer...

Answer 6

Starting off with air bags I recommend getting the Firestone #F2400. Firestone air bags have the best construction and are the most reliable. These have 5,000 lbs of load-leveling capacity and come with a lifetime warranty on the air springs. If you…

view full answer...

Answer 7

I can absolutely confirm the correct lift kit for your trailer. Based on your photos, you do in fact have a #10 Torflex axle, and they are compatible with the lift kits because you do not have 3" high-profile brackets (which just means the…

view full answer...

Answer 8

Yes, the Replacement Jack for HappiJac Truck Camper Jack System part #LC736514 (Model 4220) will fit your HappiJac Truck Camper Jack System Model 4150. If you need a new gearbox/motor then we have that as well, the Replacement Motor and Gear Head…

view full answer...

Answer 9

The clicking you described hearing on your Happijack 4150 System along with the fact that they aren't raising or lowering the camper might actually be the result of a weak power source. I first recommend simply checking to make sure that the…

view full answer...

Replacement Legs For HappiJac Truck Camper Jack Systems

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching