Recommmended Replacement Air Conditioner For a Coleman Mach Air 7300 Series  

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

For your 1993 7300 series Coleman AC I recommend the #MA00-325001 MaxxAir TuffMaxx Replacement RV Air Conditioner Cover. Based on what I found, the 7333-881 is a Mach 3. This shroud is a fit for the Mach 1, Mach 3, and Mach 15 RV air conditioners.…

The the MaxxAir shroud part #MA00-325001 is a fit for the Coleman Mach, Mach 1, Mach 3 and Mach 15 models and mounts like the original and includes mounting hardware and instructions. Mach is an entire model line of Coleman air conditioners and Mach…

Based on your model number the Replacement RV Air Conditioner Cover #MA8335A5261 is the correct shroud for your Coleman 7300 series.

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the correct fit for your 7300 series RVP. The shroud is 37 inches by 25 by 13-1/2 inches. If you don't want the two piece unit…

Hello Rosemary. For a replacement shroud for your Coleman TSR 7300 Series rooftop AC you can use the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover #MA00-325001. The TSR 7300 series is also known as the Mach 3 which does fall under the fit for…

We have what you are looking for. Furrion Chill Replacement RV Air Conditioner for Coleman Setup - 13,500 Btu - White #FR82PV. You can reuse your current coleman components with this AC unit. It comes with the required wire adapter to use with your…

For a replacement shroud on your Coleman 7300 series AC you can use the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover #MA00-325001. Your 7300 series should be a Mach 3 which falls under the fit for this shroud. However, I do recommend…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…