Will the Flint Hill Goods Trailer Dolly Work with a 2" Coupler

Question

Question:

Will this accommodate a 2inch ball.

asked by: D N

0

Expert Reply:

The Flint Hill Goods Trailer Dolly part # FHG84ZR will sit inside a 2" coupler but the coupler won't be able to latch so it could just pop off. If you want to use this dolly with a trailer that has a 2" coupler, I recommend replacing the 1-7/8" hitch ball with the 2" Hitch Ball part # 19258 but please keep in mind this won't increase the capacity of the dolly which is 600 lbs of tongue weight. It will really come down to how much you can physically pull.

expert reply by: Conner L

0

Answer 1

There is an option like the Flint Hill Goods #FHG84ZR which would work with 1-7/8" and larger hitch ball couplers, but there is no dolly that'll work with a pintle hook on a trailer. The #FHG84ZR includes a 1-7/8" hitch ball, though you…

view full answer...

Answer 2

Although the grips on the #FHG84ZR handle are capable of collapsing down, the handle itself does not. However, it can be removed. Taking out the bolt and pin that connects the handle to the main body would allow you to detach the handle making it…

view full answer...

Answer 3

With the trailer only weighing 2,200lbs you'd be looking at roughly a 220lb tongue weight if the trailer was fully loaded. I have two different trailer dolly options depending on your needs. If you want a standard no-frills option the Flint Hill…

view full answer...

Answer 4

Yes, it will! The Flint Hill Goods Trailer Dolly item #FHG24ZR will work just fine with your 2" coupler even though it has a 1-7/8" hitch ball. Due to how slow you would be moving and how light dollies are it's not important for the…

view full answer...

Answer 5

To replace your Iota IDP-240 you'll want to use the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4560K18LS8. This panel is rated for 50 amp service, can provide both 120v/240v and is compatible with…

view full answer...

Answer 6

You can try fitting the Stromberg Carlson Trailer Tray Cargo Carrier #CC-255 sideways but it wasn't designed to be installed that way so I recommend installing it the correct way and routing your wiring to it that way. This will fit A-Frames that…

view full answer...

Answer 7

The Swift Hitch Digital Wireless Hitch Alignment Systems save for the part #04928 (SH01) all use the same camera. The only difference is in regards to the number of cameras included, battery life, and monitor type. The SHO1 system uses an analog…

view full answer...

Answer 8

I recommend is the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift #JET-5000. It has a lifting capacity of 5,000 lbs which would be more than you'd need but will ensure that the jack will operate quickly and last a…

view full answer...

Answer 9

If you have a pre-existing mounting bracket on your 2020 Palomino truck camper then that means it is pre-wired for a Furrion Vision S camera system. These are wireless and come with 2 different monitor screen sizes: 4.3" - #FOS43TASF or 5"…

view full answer...

Will the Flint Hill Goods Trailer Dolly Work with a 2" Coupler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching