Dimensions of the Fold-Down Gooseneck Trailer Hitch

Question

Question:

What are the plate outside measurements?

asked by: Steve R

0

Expert Reply:

The plate of the Fold-Down Gooseneck Trailer Hitch item # 8339-4449 is 12" by 14-1/2". The whole kit weighs 101 lbs. I have linked a diagram below.

If you would like for me to find the correct one for you all I would need to know is your vehicles year, make, and model.

expert reply by: Jerred H

0

Draw-Tite Dimensions
(click to enlarge)

Answer 1

Yes, the Curt Safety Chain Loops for Ford Factory Rail Kit part #C60691 that you referenced are a confirmed fit for the factory rail kit in the bed of your 2019 Ford F-350. I attached a review video for this kit for you to check out as well.

view full answer...

Answer 2

Actually, you can use the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs Item #BWGNRK1111 even with the Air Lift air bags installed on your 2011 Ford F-250. The upper brackets for the air bags mount…

view full answer...

Answer 3

The B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1111 referenced in your question, which is confirmed to fit your 2013 Ford F-350, features brackets that mount to the outsides of the frame rails on the truck. As long as your air…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 5

I recommend going with the Timbren Rear Suspension Enhancement System Item #TFR250SDF for your 2008 Ford F-250. These are designed to support the weight in the back of the truck. Since your hauling a 5th wheel and the hitch weight is only 1430lbs…

view full answer...

Answer 6

It depends on the loads you are putting in your 2009 Ford F-250. The Timbren Suspension Enhancement Systems for F-250 rear axle have the following capacities: 6,000 pounds for part #TFR250SDF and 12,000 pounds for part #TFRTT350F. If the total…

view full answer...

Answer 7

The Rota-Flex Lockout Kit for Blue Ox 5th Wheel Hitches #BLU62XR is just a lockout kit to prevent the Rota-Flex head from pivoting, making it a standard pin box again so you shouldn't have a problem using it with your Andersen Hitch.

view full answer...

Answer 8

I had the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500 measured and have a picture with all measurements included. This is indeed rectangular and is typically installed with the longer sides going across the bed…

view full answer...

Answer 9

I spoke with my technical contact at Curt and he informed me that the Curt Hitch #C15810 will fit spare tires with a wheel size of less than 20 inches. We happen to have a Ford F-350 on site, so we checked out the spare tire underneath and it was a…

view full answer...

Answer 10

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System part #AM3200 will not void the warranty on any trailer or frame (Including Lippert) per Anderson so you won't have any issues using it.

view full answer...

Answer 11

I reached out to the manufacturer, Buyers Products, regarding the size of the bolts needed to install the Buyers Products 42" x 13-1/2" Gooseneck Hitch Plate with 2-5/16" Ball And Two D-Rings #3373014981. They told me that you will…

view full answer...

Dimensions of the Fold-Down Gooseneck Trailer Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching