Is the Camco Trailer Tongue Jack Stand # CAM44635 Safe To Use With 760LBS Of Tongue Weight?

Question

Question:

The stand is good for 5000lb? I have a travel trailer that has weight of 9000lb, but the hitch weight is 760lb? Can this stand be used? Thank you

asked by: Myles F

0

Expert Reply:

Yes, the Camco Trailer Tongue Jack Stand # CAM44635 can be used on your trailer with 760lbs of tongue weight. The stand itself is rated for up to 5,000lbs of vertical load. You might consider the Fastway Flip Automatic Fold-Up Jack Foot with a 4" # FA88-00-4500 or 6" # FA88-00-6500 height. This stays mounted to the jack so there is no stand to loose or take up storage space. The 4" foot is rated for up to 1,600lbs while the 6" is rated for up to 1,400lbs of tongue weight.

expert reply by: Bud M

0

Answer 1

The only type of wheel locks we will have compatible with your 5/8" studs are the Trimax #TMX65FR or #TMX42ZR. We do not have any wheel locks in the 5/8" size like the 1/2" #RG01-150 you found. And when searching online I was unable to…

view full answer...

Answer 2

It's possible you could drill out the lock of the Trimax wheel lock part #TMX65FR and you'd be able to defeat it that way but Trimax doesn't share with us exactly how to defeat their wheel lock so we can't guarantee that would work.…

view full answer...

Answer 3

I recommend looking at the etrailer Accessories Bag #e98900 as a better option than the Ultra-Fab Universal Carrying Bag #UF34FR. The Ultra-Fab bag was specifically designed for their lightweight wheel stabilizers and would likely not handle the…

view full answer...

Answer 4

For your T and G Little Guy tear camper you could use the Swagman Roamer LT roof rack part #S80510 which does require drilling through the roof of your camper. But that's a step that's not avoidable since all racks will require this…

view full answer...

Answer 5

It is not usually necessary to change wheel studs when switching from stamped steel trailer wheels to machined aluminum wheels like the Lionshead #LHSJ211G but I went to our warehouse to measure the thickness of the material at this wheel's hub,…

view full answer...

Answer 6

The Trimax Adjustable Wheel Lock part #TMX65FR weighs around 18 lbs. It's designed for most 10" - 18" wheels for either vehicles or trailers. The device stops the wheel from rotating i.e. preventing theft and the clamp covers the lug…

view full answer...

Answer 7

All A-Frame mounted jacks like the Ultimate Trailer Jack, part #322-RDJ-2K, use roughly the same 3-inch mounting hole bolt pattern. The mounting holes are also elongated to allow about 1/4 inch of extra mounting versatility. Simply put, A-Frame jacks…

view full answer...

Answer 8

Valterra makes the similar jack stand #A10-0900. This one is rated for 10,000 pounds. I have linked a video review of this stand for you.

view full answer...

Answer 9

The best option we have would be something like the Camco Trailer Tongue Jack Stand #CAM44635 or FloTool Wheel Chock and Jack Stand #FT11933MI if you are wanting a way to get more height of your jack since Stromberg does not make an extension foot…

view full answer...

Answer 10

Camco Trailer Tongue Jack Stand #CAM44635 can be used if the jack has a footplate but ideally you would take off the foot so that the inner jack tube fits directly in the stand. With a footplate the jack could slip off of the stand. If you cannot…

view full answer...

Answer 11

The Camco Trailer Tongue Jack Stand #CAM44635 can support up to 5,000 pounds. The jack is lightweight and easy to store. It is durable, and has a UV stabilized resin. I attached a review video link below.

view full answer...

Is the Camco Trailer Tongue Jack Stand # CAM44635 Safe To Use With 760LBS Of Tongue Weight?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching