How To Choose Correct Replacement Landing Gear Legs for Heartland Sundance 5th Wheel Trailer
Question:
2010 heartland Sundance 2900MK right Landing gear and electric motor needs to be replaced. Need parts.
asked by: Peter A
Expert Reply:
In order to confirm the correct replacement landing gear leg for your trailer you'll need to take a few measurements, the first simply being the length of the outer tube. Then, you'll need to measure the distance between the weld stops either inside to inside or outside to outside. The weld stops are what keeps the brackets in position on the outer tube. I have attached a photo below for reference.
The most common replacement has a 29-1/2" long outer tube with 15-1/2" weld stop spacing inside to inside or 17-1/2" outside to outside. In which case, you'd use part # LG-179013 for the lead leg or part # LG-179014 for the follow leg. Then for the replacement motor and gear box you can use the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear part # LG-179015 and Replacement Motor for Stromberg Carlson Electric Landing Gear part # LG-142178.
I have attached our full list of replacement legs to choose from as well if the above won't work.
Products Referenced in This Question
Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Motor
- Stromberg Carlson
more information >
Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Stromberg Carlson
more information >
Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Gearbox
- Stromberg Carlson
more information >
Product Page this Question was Asked From
Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Stromberg Carlson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacment Landing Gear Leg for Atwood Landing Gear
- Q&A: Replacement Leg for Lippert Ground Control 2.0 LC241846
- Q&A: Are Replacement Parts for Atwood Landing Gear Available or Will Another Brand Fit
- Article: Trailer Tire Sizing
- Q&A: Replacement 14,000 lb. Hydraulic Jack Assembly for Lippert Level Up Systems
- Q&A: How to Measure to Pick Out Replacement Landing Gear for a Trailer
- Q&A: Replacement Landing Gear Legs for a 2010 Jayco Eagle Super Lite
- Q&A: Replacement For Fan-Tastic Roof Vent FV6300
- Article: How to Choose a Bike Rack for a Motor Home or RV
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Stability Control for Heavy Duty Vehicles
- Article: What Exactly is Tongue Weight?
- Article: Determining Trailer Tongue Weight