What Inner Diameter Does Grease Seal for 5,200 lb Trailer Axle Hub Have
Question:
I saw etrailer QandA wrote and told a customer that For example, for a 5200-lb rated axle we offer Dexter hub/drum assembly # 8-201-5UC3 which fits on spindles that have inner bearing # 25580 that you referenced and outer bearing # LM67048. This hub takes grease seal # RG06-090. I was told from etrailer the grease seal to use was the 00-1036-00 for my 25580 inner bearing and my LM67048 so what gives???? the RG06-090 IDis 2.125inch and the 10-36 IDis 2.25. So which is the correct seal for my above hubs/bearings???? Thank You,
asked by: Bill S
Expert Reply:
For trailer axles that have a capacity of between 5,200 and 7,000 lbs the grease seal requirement can be one of two options without any real rhyme or reason which is pretty frustrating. Sometimes the spindle will require the smaller diameter and other times it's the larger diameter. To verify what you'd need will require you to measure the spindle on your trailer or get the bearing number out of the hub currently.
Products Referenced in This Question
10-10 Grease or Oil Double-Lip Seals - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
10-10 Grease or Oil Double-Lip Seals - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Continue Researching
- Q&A: How to Determine Correct Bearing Buddy For Boat Trailer
- Q&A: How To Measure to Pick Out Correct Bearing Buddy for Boat Trailer
- Q&A: What are Drive-In Grease Caps
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer lights
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Search Results: bearing buddy
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Search Results: trailer jack
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: Trailer Tire Sizing
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Search Results: lug nut
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: lug nuts
- Video: Choosing the Right Brake Controller
- Shop: Grease Seals 10-36 (pair)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Roof Rack