bing tracking image
Q & A Icon

Recommended Leaf Springs and Shackle Kit for a 2021 Grand Design Imagine 2670MK Travel Trailer  

Question:

I need help with leaf springs. My camper is 2670mk grand design imagine. 4400# axles and measures with weight on it 26inch center to center. have two bent straight on same side., so guess i need to change all four. need sprngs and new kits to install. also should i install brass bushings or do the plastic wear just a well. I need as soon as possible.

0

Expert Reply:

Since you measured your springs with weight on them I am going to recommend a couple of different length springs as replacements. You will want to verify how long your springs are without weight on them before purchasing. The compression caused by the full weight of your trailer will easily stretch them out around 1" if not more. It is recommended to change both sides if you are replacing suspension components.

24-7/8" Long - Item # e76SR

25-1/8" Long - Item # e47SR

I highly recommend swapping out the plastic bushings for bronze ones. You will want the Bronze Bushing Dexter item # D014-077-00 to do this.

As far as replacement bolts and shackles go there are a couple of options for you, depending on the length of your shackle straps. I have listed them below.

2-1/4" Shackles - MORryde Shackle Upgrade Kit for Tandem Axle Trailers item # MR46ZR

3-1/8" Shackles - MORryde Shackle Upgrade Kit for Tandem Axle Trailers item # MR76ZR

I have linked a couple of installation videos below.



expert reply by:
0
Jerred H

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>