Nut Size of Smart-Slot Crossbar Adapter Kit for Yakima BigCatch Saddles

Question

Question:

What is the size of the nut? I need to get a replacement nut.

asked by: Neal

0

Expert Reply:

The Smart-Slot Crossbar Adapter Kit for Yakima BigCatch Saddles part # Y04092 uses M6 nuts.

expert reply by: Conner L

0

Answer 1

The correct replacement mounting hardware available for the Yakima SpaceCase Cargo Box is the Replacement Mounting Hardware part #8870098. The Replacement Quick-Dial Mounting Assembly part #Y8870097 will not work as it requires a rather unique…

view full answer...

Answer 2

Yes! Using the Smart-Slot Crossbar Adapter Kit #Y04092 will allow you to mount the Yakima BigCatch Kayak Carrier w/ Tie-Downs #Y04091 to the Thule WingBar Evo crossbar channels.

view full answer...

Answer 3

The Smart-Slot Crossbar Adapter Kit for Yakima BigCatch Saddles #Y04092 are designed specifically to fit the Yakima BigCatch Kayak Carrier w/ Tie-Downs - Saddle Style - Rear Loading - Clamp On - 150 lbs #Y04091. The measurements of the overall base…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...