Can 10" Diameter Electric Brakes Be Fitted To a 2,000LB Trailer Axle?
Question:
Do you guys or anyone sell 10inch brakes for 2000# axles? I realize that 10inch drums are fitted to 3500# hubs. Is there a hybrid hub and drum assembly out there that would work for my application? In other words 10inch drums on 2000# hubs. Thanks
asked by: Lou G
Expert Reply:
It appears the only size brakes available for a 2,000lb axle is going to be the 7" Diameter # AKEBRK-2 due to there not being a hub for this size axle spindle which will accommodate the larger 10" brakes. If you are set on the larger 10" brakes you can replace your Spindles # TRU74FR with the larger 3,500LB spindles or place a 3,500LB Axle # 35545E-ST-89 under the trailer. You will still be able to use your 2,000lb suspension as long as you do not exceed the weight rating of the springs. With the larger spindle you would be able to install 10" Brakes # AKEBRK-35-SA with the larger Hub # AKHD-545-35-EZ-K.
Products Referenced in This Question
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Q&A: How To Setup a 2019 Jeep Cherokee Trailhawk for Flat-Towing
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Fan Recommendation for the MaxxAir 4700K
- Article: Trailer Wiring Diagrams
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Q&A: Brake Controller and 7-Way Install on 2013 Chevy Express w/ Tow Pakage
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch