How Long Are The Aries Round Nerf Bars # AA203034

Question

Question:

how long is the running boardeldon

asked by: Eldon

0

Expert Reply:

The Aries Round Nerf Bars # AA203034 are 44.53" in length and 3" in diameter.

expert reply by: Kevin C

0

Answer 1

Yes, the universal Pilot Aluminum Step part #AS-400 will install on your 2008 Ford Ranger. It installs on the frame on the driver's-side or passenger's-side and has a 300 lb weight capacity. If you are looking for a more custom fit…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The Dexter Trailer Hub Assembly #8-258-50UC1-EZ that you referenced will fit well on your axle. I spoke with Dexter and they confirmed the bearings used for your axle are L44649 for both the inner and out bearings and the grease seal has a 1.500 inch…

view full answer...

Answer 8

Since you have a 4 on 4 inch bolt pattern currently that would indicate that you have a 2,000 lb axle so you could swap your current hubs pretty easily with the bolt pattern you are looking for with the part #34822545BX that you referenced. This hub…

view full answer...

Answer 9

Trailer tire and wheel combos are balanced like this: every tire and every wheel has a high (heavy) and low (light) spot. The manufacturers offset the high spot on the tire with the low spot on the wheel to balance them. Trailer tires do not need to…

view full answer...

Answer 10

It sounds like you're looking for the Trailer Idler Hub Assembly for 2K Axles part #AKIHUB-545-2-LF-2K which has a 5 on 4-1/2" bolt pattern and uses two L44649 bearings. This is designed for a 2,000/2,200 lb axle which if this is your…

view full answer...

How Long Are The Aries Round Nerf Bars # AA203034

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching