Can A Friction Sway Control System Be Used To Prevent Sway When Triple Towing
Question:
I have a 17 crestliner fishing boat about 2200 pds boat and trailer and pull it behind my fifth wheel. I want to take any chance of sway out of the pole tongue. What would you recommend? The EQ95-01-5950 and the 17200 do the job?
asked by: Troy W
Expert Reply:
Since you have a pole-tongue you would need an adapter like the # EQ95-01-5950 you referenced to be able to use the Curt Friction Sway Control # 17200. The only problem with this is that the pole adapter is really designed for use with weight distribution hitches, so using just a friction sway control wouldn't be splitting the load evenly between both sides and while the adapter is made to be heavy duty it hasn't been tested receiving stress to only one side. You'd be taking taking the liability if anything happened, not that it probably would since it's only a 2,200lb boat/trailer, but the risk is still there.
If you don't already have a ball mount with a friction sway control bracket then you can use the # RP26003 instead of having to weld on the tab that comes with part # 17200.
You also won't be able to back up at all while the friction sway control is installed.
Products Referenced in This Question
Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Pole Tongue Adapters
- Equal-i-zer
- Equal-i-zer
more information >
Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Flexco Double Step Width Dimensions
- Q&A: How To Mount Weight Distribution Hitch On 2021 Intech Flyer Discover W/ Completely Covered A-Frame
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Break Control Installation for Tekonsha Prodigy P3 on 2019 Mercedes-Benz Sprinter 3500
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Which Connector Is Needed To Install Curt Spectrum Trailer Brake Controller On a 2018 VW Atlas?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Are the Dimensions of the Furrion Die-Cast Grates for RV Stove
- Q&A: Can Sway Control be Used on a Trailer without Using Weight Distribution
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch