Correct Kodiak Disc Brakes For 5,200 lb Dexter Trailer Axle Beam
Question:
I have a 2002 Heritage Boat trailer with old ufp axles and hubs that I want to replace and upgrade with these dexter 5200lbs axles. I’ve measured spring length and found these axles match my dimensions, but I need to find hubs that will work. Will the Kodiak rotor/hubs part # KOD69FR work with these axles. From my own research the only difference I’ve found is the outer bearing part numbers are different, but the inside dimensions are the same. Thanks
asked by: Koby K
Expert Reply:
Thanks for reaching out!
The Kodiak Disc Brakes # KOD69FR you were looking at will definitely work with the 89" Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327820 for your trailer. The outer bearing part number is different but the inner dimensions are the same so these brakes will still fit just fine!
Attached are some review videos for you to check out.
Products Referenced in This Question
Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 6000 lbs Axle
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 5200 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Shop: Hydrastar Electric-Hydraulic Actuator w/ Line Kit for Disc Brakes - 1,600 psi
- Shop: Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi
- Shop: Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube
- Shop: Ultra-Fab Power Twin II Manual Stabilizer for Trailers and RVs - 30" Lift - 6,000 lbs
- Shop: Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 14,000 lbs
- Shop: Kodiak Disc Brake Assembly - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Video: Review of Kodiak Trailer Brakes - 12 Inch Hub/Rotor - 6 on 5-1/2 - Dacromet Disc Brakes - KOD69FR
- Q&A: Kodiak Disc Brake Kit Recommendation for a Dexter D52-8 Axle
- Q&A: Replacement Brake Assemblies for a Dexter D52 Axle
- Q&A: What do the Hub Face and Spring Center Measurements Mean for an Axle
- Q&A: Timbren Axle Less System that Can Install on a Trailer with 6 on 5-1/2 inch Bolt Pattern
- Q&A: Trailer Hub Replacement for 2021 Grand Design Reflection 5th Wheel with 5,200 lb Axle
- Q&A: What is the Best Grease for Trailer Bearings
- Video: Lippert Center Point Trailair Air-Ride Suspension Upgrade Review
- Video: Kodiak XL ProLube Oil Bath Hub Body and Cap Review
- Search Results: walking beam
- Search Results: kod69fr
- Search Results: brake line kit
- Video: Kodiak Trailer Brakes - Disc Brakes - K2HR526D Review
- Video: Kodiak Trailer Bearings Races Seals Caps - Caps - XLPROLUBE1980 Review
- Video: HydraStar Vented Marine Electric Over Hydraulic Actuator Installation - 2019 Grand Design Momentum 5
- Video: HydraStar Hydraulic Brake Line Kit Review
- Search Results: k2hr526dkg
- Search Results: kodiak 225 brake caliper
- Search Results: disc brake conversion kit
- Search Results: brake calipers
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision