Recommended Tonneau Cover For a 2019 Chevy Silverado 1500 With 5-3/4' Bed and Yakima OverHaul Rack

Question

Question:

Hello etrailer team- I am looking to purchase a tonneau cover that is compatible with Yakima OverHaul set up. Many thanks

asked by: Jesse S

1

Helpful Expert Reply:

I recommend using the RetraxONE XR Hard Tonneau Cover # RTX24YR on your 2019 Chevrolet Silverado 1500 with the 5-3/4' bed. This tonneau cover includes T-Slot rails that will allow you to install the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-58 with the Adapter Kit # Y01155. The Retrax cover uses polycarbonate slats and can be locked in any position along the rails. It is made in the USA and will install onto your bed with a no drill installation.

expert reply by: Bud M

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 7

GM only made a 5.5', 6.5', and 8' bed length for their 2018 Silverado 1500 models. If you're measuring the outside of the bed and not the inside from the bulkhead to the tailgate you'll get a longer length like the 84"…

view full answer...

Answer 8

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 9

The Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 is going to need some rails to mount to in the bed of your 2020 Chevy Silverado. For this I recommend the Demco Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th…

view full answer...

Answer 10

The Air Lift LoadLifter 5000 Ultimate Plus kits like the part #AL88288 that come with the braided lines actually also come with the nylon air tubing that runs to the inflation valve still which would be where you'd install a union tee like the…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Recommended Tonneau Cover For a 2019 Chevy Silverado 1500 With 5-3/4' Bed and Yakima OverHaul Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching