Identifying 4-Way Trailer Wiring Colors that are Brown, Green, White, and Red
Question:
I have 4 wires on trailer brown green white red what matches to tail light Tail light has 4 color what is the combination
asked by: Mark
0
Expert Reply:
For the trailer wiring you have now you'd need to match all of the colors to the standard 4-way wiring colors except the red would go to yellow as that's only color that's different. This would be the left turn/stop signal.
Normally white is ground, brown is taillight, green is right turn/stop, and yellow is left turn stop.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed For Flat Towing a 2024 Ford Maverick Behind a 2010 Winnebago Journey With Air Brakes
- Q&A: Where is the Dummy Plug to Install a Brake Controller Adapter on 2019 Chevrolet Silverado 1500
- Q&A: Caliper Bolts for AL-KO/Hayes Disc Brake Caliper BP18-050
- Q&A: Does The Progressive Dynamics PD4655V Have A Lithium Jumper
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Which Instructions Are Used Installing a Roadmaster Brake-Lite Relay in a Ford F-150 w/ Neutral Tow
- Q&A: Recommended Diode for Charging Line From Motorhome to Towed Vehicle (Toad)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Maintenance Schedule
- Q&A: How To Wire In The V-Shaped Identification Light Bar When Replacing Light With Only 1 Wire
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing