Correct SumoSprings Custom Helper Springs for a 2023 Fleetwood Bounder 35K

Question

Question:

Do you have sumo springs or a product equivalent for a 2023 Fleetwood Bounder, model 35k?

asked by: Steve

0

Expert Reply:

The correct SumoSprings Custom Helper Springs for a 2023 Fleetwood Bounder 35K on a Ford F53 Chassis is part # SSR-187-54-1 for the rear and part # SSF-170-40-2 for the front. These are one of the most popular upgrades you can make on your motorhome and have real noticeable improvements. The springs will help with to reduce body roll, absorb road shock, and minimize sway. They are also made here in the USA.

expert reply by: Conner L

0

Answer 1

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 2

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 5

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 6

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 7

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 8

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 is listed to fit and install above the leaf springs on your 2019 Coachmen Leprechaun 319MB. I tried looking up a photo of the suspension on your motorhome but I could find…

view full answer...

Answer 9

For your 2023 Coachmen Pursuit 31BH you will need the Front SumoSprings Rebel Custom Helper Springs #SSF-170-40-2 and Rear SumoSprings Maxim Custom Helper Springs #SSR-184-40-1. If you were to select only one to install first I recommend the rear…

view full answer...

Answer 10

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 11

Hey David, for your 1990 Jeep Wrangler the Roadmaster Diode Kit part #RM-15267 would be a really great option. This installs diodes on the Wrangler's taillight circuits which allows the RV to control them. It also comes with the wiring that runs…

view full answer...

Answer 12

The correct steering stabilizer and brackets for your Coachmen Encore 325SS Class A Motorhome on a 2021 F53 Chassis with a V8 engine would be the Roadmaster Reflex Steering Stabilizer with Mounting Brackets #RM62VR.

view full answer...

Correct SumoSprings Custom Helper Springs for a 2023 Fleetwood Bounder 35K

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching