What is The Spacing Between Cradles on the Yakima FullSwing 4 Bike Rack

Question

Question:

Yakima FullSwing 4 Bike Rack - 2 Hitches - Swing Away Hello, how far apart or the connectors. in other words, the spread between clamps, or what would be between bikes is what?

asked by: Jason R

0

Expert Reply:

There is not one specific measurement for the space between the cradles (connectors) on the Yakima FullSwing 4 Bike Rack # Y02465. That is because the cradles are adjustable, allowing you to have a more custom spacing for different bikes needs.

I have included a video that demonstrates how this bike rack operates. Around the 1:55 mark, they go over adjusting the cradles.

expert reply by: Scott S

0

Answer 1

The measurement from the center of the hitch pin hole to the face of the receiver tube on the etrailer Trailer Hitch Receiver #e98855 is approximately 2.5".

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The Thule Camber #TH9058 and other similar style hanging racks are not designed to be tilted with bikes loaded. There is an alternative in the Softride Hang2 2-Bike Rack #SR27041 which is designed for tilting away with bikes loaded. It actually has a…

view full answer...

Answer 4

The only solution to reducing wind noise on a roof rack, like your Rhino-Rack Vortex Aero Crossbars 54" #RRVA137B-2, is to install a wind fairing / deflector. To determine which size to get, measure the usable crossbar space between the…

view full answer...

Answer 5

From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers #Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) #Y00101 fit these Kwik-Rail mounts. For…

view full answer...

Answer 6

Yes, you can use the Napier 82000 suv tent with the Yakima EXO Swing Away Camp Kitchen and Enclosed Cargo Carrier item #Y86AV. You will just need to mount your tent off center towards the drivers side so you have enough room for the swing arm to…

view full answer...

Answer 7

From end to end, the extendable arm measures 30-5/16 inches for the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side #PVD20B.

view full answer...

What is The Spacing Between Cradles on the Yakima FullSwing 4 Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching