Fuse Installation for Curt T-Connector Vehicle Wiring Harness on 2019 Toyota Highlander
Question:
The install of the wiring was uneventful thanks to your videos. One problem I had was the fuse dimensions for under the hood. My 2019 highlander hybrid fuses are smaller than the 2 sizes you provided.. the larger of the 2 went in the rear with the wiring the smaller one was still larger than what the ones were in my vehicle. Thanks.
asked by: Tim M
Expert Reply:
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56217 which is a fit for a 2019 Toyota Highlander has three fuses; 1 ATC, 1 ATS, and 1 Mini. The ATC fuse goes inside the inline fuse holder on the power wire from the battery to the converter box. The ATS or Mini fuse gets installed into the engine bay fuse box in the "Towing" slot. It can be either depending on your fuse box but more often than not it's the Mini fuse. If you for some reason have another style of fuse you can check your spare fuses for this (usually on the underside of the lid) or you can obtain this from a local auto parts store.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: c65cr
- Search Results: 76046
- Video: Best 2018 Chrysler Pacifica Trailer Hitch Options
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2018 Chrysler Pacifica
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: No-Drill Mount for Electrical Mounting Bracket - Short
- Search Results: 11755
- Search Results: 18140
- Search Results: curt harness
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56322 Review
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2019 Chrysler Pacifica
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Video: etrailer.com Trailer Hitch Installation - 2018 Chrysler Pacifica
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2018 Chrysler Pacifica
- Video: Draw-Tite Max-Frame Trailer Hitch Receiver Installation - 2022 Chrysler Pacifica
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: 118712
- Q&A: How Do I Know How High The Ball Should Sit Above the Ground
- Q&A: Troubleshooting Blown Fuse on Curt T-Connector Vehicle Wiring Harness
- Shop: Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Search Results: tow harness
- Q&A: Is 10 Amp Fuse Included with Curt Trailer Wiring for a 2008 Toyota Highlander Enough
- Q&A: Fuse Location for Installation of Curt Wiring Harness on 2018 Toyota Highlander
- Q&A: Does Installing Trailer Wiring on Vehicle Require Disconnecting Vehicle Battery
- Q&A: Can the Curt T-Connector be Permanently Mounted on the Outside of a 2019 Toyota Highlander