Recommended Front Mount Trailer Hitch And Generator Tray For A 2022 Ford F-350 Super Duty

Question

Question:

I would like to carry a portable generator on the front of my 2022 Ford F-350. What parts will I need to get that accomplished?

asked by: Marie

0

Expert Reply:

I recommend the EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH83GR for your 2022 Ford F-350 Super Duty. I like this front mount hitch over the others because it has a hidden cross tube after installation that will provide your 2022 Ford F-350 Super Duty with a clean, from the factory look. The hitch has an easy, bolt-on installation.

When it comes to hauling your portable generator I recommend the 16x21 TorkLift Lock and Load SideKick Cargo Tray for 2" Hitches - 200 lbs # TLA7901 or the larger 24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 500 lbs # TLA7752. Both of these cargo trays will not interfere with your front bumper when installed on the EcoHitch.

If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you in your towing endeavors.

expert reply by: Noah E

0

Answer 1

Yes, the Curt Front Mount Trailer Hitch Receiver #C31078 will fit your 2022 Ford F-350 Super Duty Diesel 4x4. This hitch fits all models with the exception of those with dual rear wheels. This features a gloss black powder coat finish and a bolt-on…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 3

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 4

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub…

view full answer...

Answer 5

With the weight of your camper I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL35FJ. I prefer these as they have the internal jounce bumper which helps to reduce the bounce that is often associated with towing a trailer and…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Answer 11

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Answer 12

The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs #DL24239 or…

view full answer...

Recommended Front Mount Trailer Hitch And Generator Tray For A 2022 Ford F-350 Super Duty

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching