Outside to Outside Dimensions of Support Arms of Swagman Trailhead Bike Rack

Question

Question:

Interested in the Swagman Trail head 2. Can you tell me what the outside distance between the bike support arms are? Can I assume the bike hold down assemblies are moveable/removeable? Thanks

asked by: Tom H

0

Expert Reply:

The Swagman Trailhead bike rack part # S63360 has a distance of 13-7/8 inches between the arms that hold the bikes when measured from outside to outside and the frame cradles are adjustable.

expert reply by: Jameson C

0

Arm Width Dimension
(click to enlarge)

Answer 1

The Swagman Trailhead part #S63360 has the larger rise at 3 inches over the #63120 which has 2 inches. The Trailhead also has about two inches of straight shank directly out of the hitch opening before starting to angle upward. It's the ground…

view full answer...

Answer 2

To determine which 3 bike rack would fit on your Wrangler, you will need to measure the distance from the hitch pin hole in your receiver rearward until the spare tire is cleared (see photo). We have three bike racks to choose from. You will need to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 5

Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…

view full answer...

Answer 6

Thanks for reaching out, Roy! The term "best" can be a little subjective since everyone has their own experiences and needs/wants, but in regards to which bike rack has the best features it is the Thule Epos Bike Rack #TH99XE hands-down…

view full answer...

Answer 7

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 8

That all depends on the style of bike you're going to be using. The Hollywood Racks Destination Bike Rack for 2 Bikes item #HLY94FR you were looking at is a great option for bikes with alternative frames and fenders. It uses padded cradles with…

view full answer...

Answer 9

Since your 2024 Kia Telluride is an SX model that has LED taillights the trailer wiring harness kit you'd want is the Curt part #C59236 which we have had chance to install on a 2024 Kia Telluride just like yours. For a hitch our most popular…

view full answer...

Answer 10

Yes, the Draw-Tite Sportframe Trailer Hitch Receiver #24972 is the correct trailer hitch for your 2021 Honda Accord Hybrid model. Attached is an installation video of this hitch on a 2021 Accord as well as a photo showing what the finished result…

view full answer...

Answer 11

Installing a trailer hitch like the Curt #C11363 which is the only hitch we carry confirmed to fit the electric 500e model, does not require any welding. Per the install details, which I've linked for you, the install time is around 50 minutes…

view full answer...

Answer 12

The adjustable frame clamps on the Hollywood Racks Destination Bike Rack #HLY94FR allows for you to carry women's bikes or hybrid framed bikes without needing an adapter. The Frame clamp can be lowered to the clamp to the frame on both bikes. I…

view full answer...

Outside to Outside Dimensions of Support Arms of Swagman Trailhead Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching